High Flow Rate Large Flooding Water Pump with Control Cabinet

Model NO.: S Double Suction Water Pump
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Drive: Electric Motor/ Diesel Engine
Voltage: 220V/380V/410V/460V/High Voltage
Frequency: 50Hz/60Hz
Color: as Customer Required
Warranty: Within 1 Year
Application1: Agricultural Irrigation
Application2: Dewatering and Process Water
Application3: Municipal Water Supply
Application4: Environmental Protection
Application5: Mine Water Supply and Drainage
Trademark: DEPON
Transport Package: Plywood Cases/ as Customer Required
Specification: 150S-50 ~ 800S-76B
Origin: China
HS Code: 8413709990
Model NO.: S Double Suction Water Pump
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Drive: Electric Motor/ Diesel Engine
Voltage: 220V/380V/410V/460V/High Voltage
Frequency: 50Hz/60Hz
Color: as Customer Required
Warranty: Within 1 Year
Application1: Agricultural Irrigation
Application2: Dewatering and Process Water
Application3: Municipal Water Supply
Application4: Environmental Protection
Application5: Mine Water Supply and Drainage
Trademark: DEPON
Transport Package: Plywood Cases/ as Customer Required
Specification: 150S-50 ~ 800S-76B
Origin: China
HS Code: 8413709990
High flow rate large flooding water pump with control cabinet



High Flow Rate Large Flooding Water Pump with Control Cabinet
Introduction
The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.

Features
*  Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has    good wear-resisting, corrosion resistance and high reliability.

*  High efficiency hard alloy, and low NPSH

*  To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity    design, alloy bearing grease lubrication oil.

*  Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation

*  Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.

*  The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements

Technical Data
Pump Outlet: 80-800mm
Capacity: 60-11,600m3/hr
Head: 7-200m
Temperature: Max. 105ºC
Max. Working Pressure: 25 bar
Max. solids content: 80mg/L


Application
* Fire Protection
* Water Transfer
* Municipal Water Supply
* Irrigation
* Industry
* Process Water
* Raw Water Supply
* Dewatering (Clean Water)
* Flood Mitigation

Model Meaning
E.g. 250 S - 39 A
250 - Pump's inlet diameter
S - single-stage double-suction centrifugal pump
39 - rated head
A - impeller cut for the first time

High Flow Rate Large Flooding Water Pump with Control Cabinet
Pump Performance
 
Pump Model Capacity
 (m3/h)
Head(m) Motor Power 
(kw)
Speed 
(rpm)
NPSH 
(m
)
150S-50 160 50 37 2950 3.9
150S-78 160 78 55 2950 3.7
200S-42 280 42 45 2950 6
200S-95 280 95 132 2950 5.3
250S-14 485 14 30 1450 3.8
250S-65 485 65 132 1450 3.1
300S-90 790 90 315 1450 4.2
350S-125 1260 125 710 1450 5.4
400S-90 1620 90 560 1450 6.2
500S-59 2020 59 450 970 4.5
600S-75 3170 75 900 970 6
800S-76 5500 76 1600 730 6
800S-76 4400 49 800 585 4.2

Construction Material
S type pump could supplied in Cast iron, Ductile iron, Stainless steel material.
Part Description Cast Iron Ductile Iron Stainless Steel
Casing AS1830/T260 AS1830/300-17 AS2074/H6B
Shaft AS2837/420
Impeller AS2074/H6B AS1830/300-17 AS2074/H6B
Shaft Sleeves AS2074/H6B
Lantern Ring AS1565/ALLOY 836B AS1830/T260 AS2074/H6B
Gland AS1830/T260 AS2074/H6B
Wearing Ring AS2074/H6B

High Flow Rate Large Flooding Water Pump with Control Cabinet
High Flow Rate Large Flooding Water Pump with Control Cabinet

High Flow Rate Large Flooding Water Pump with Control Cabinet
FAQ


A: What kind of company you are?
Q: Shijiazhuang Depon Pump Company is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our customers are at home and abroad. Hope to coorperate with the worldwide friends. 

Q: What's your MOQ?
A: Trial sample order is OK.
 
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
 
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
 
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
 
Q: Can you do OEM brand?
A: Yes, Welcome.
 
Q: What information should I offer to get pump solution?
1, Head:     m
2, Flow:    m3/h
3, Max Solid size:    mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor: 



Welcome inquiry! 
Contact: 
Mob: +86 158 3083 2057
Tel: +86 312 8929296
Fax: +86 312 3085383
 
 


  High flow rate large flooding water pump with control cabinet



High Flow Rate Large Flooding Water Pump with Control Cabinet
Introduction
The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.

Features
*  Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has    good wear-resisting, corrosion resistance and high reliability.

*  High efficiency hard alloy, and low NPSH

*  To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity    design, alloy bearing grease lubrication oil.

*  Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation

*  Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.

*  The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements

Technical Data
Pump Outlet: 80-800mm
Capacity: 60-11,600m3/hr
Head: 7-200m
Temperature: Max. 105ºC
Max. Working Pressure: 25 bar
Max. solids content: 80mg/L


Application
* Fire Protection
* Water Transfer
* Municipal Water Supply
* Irrigation
* Industry
* Process Water
* Raw Water Supply
* Dewatering (Clean Water)
* Flood Mitigation

Model Meaning
E.g. 250 S - 39 A
250 - Pump's inlet diameter
S - single-stage double-suction centrifugal pump
39 - rated head
A - impeller cut for the first time

High Flow Rate Large Flooding Water Pump with Control Cabinet
Pump Performance
 
Pump Model Capacity
 (m3/h)
Head(m) Motor Power 
(kw)
Speed 
(rpm)
NPSH 
(m
)
150S-50 160 50 37 2950 3.9
150S-78 160 78 55 2950 3.7
200S-42 280 42 45 2950 6
200S-95 280 95 132 2950 5.3
250S-14 485 14 30 1450 3.8
250S-65 485 65 132 1450 3.1
300S-90 790 90 315 1450 4.2
350S-125 1260 125 710 1450 5.4
400S-90 1620 90 560 1450 6.2
500S-59 2020 59 450 970 4.5
600S-75 3170 75 900 970 6
800S-76 5500 76 1600 730 6
800S-76 4400 49 800 585 4.2

Construction Material
S type pump could supplied in Cast iron, Ductile iron, Stainless steel material.
Part Description Cast Iron Ductile Iron Stainless Steel
Casing AS1830/T260 AS1830/300-17 AS2074/H6B
Shaft AS2837/420
Impeller AS2074/H6B AS1830/300-17 AS2074/H6B
Shaft Sleeves AS2074/H6B
Lantern Ring AS1565/ALLOY 836B AS1830/T260 AS2074/H6B
Gland AS1830/T260 AS2074/H6B
Wearing Ring AS2074/H6B

High Flow Rate Large Flooding Water Pump with Control Cabinet
High Flow Rate Large Flooding Water Pump with Control Cabinet

High Flow Rate Large Flooding Water Pump with Control Cabinet
FAQ


A: What kind of company you are?
Q: Shijiazhuang Depon Pump Company is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our customers are at home and abroad. Hope to coorperate with the worldwide friends. 

Q: What's your MOQ?
A: Trial sample order is OK.
 
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
 
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
 
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
 
Q: Can you do OEM brand?
A: Yes, Welcome.
 
Q: What information should I offer to get pump solution?
1, Head:     m
2, Flow:    m3/h
3, Max Solid size:    mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor: 



Welcome inquiry! 
Contact: 
Mob: +86 158 3083 2057
Tel: +86 312 8929296
Fax: +86 312 3085383
 
 


 

Electric Wire Rope hoist

Maximum Load:1000-100,1000kg

This novel VT type Electric Wire Rope Hoist is made with 13 patented technologies.

As contrasted with conventional designs, the VT type electric wire rope hoist is a revolutionary new generation product. It houses many brilliant brilliant attributes, such as a superb performance, short headroom, accurate positioning, great operating comfort, and maximum security and reliability, all encompassed in a compact design. It is a multi-functioning machine that has revolutionized the way the wire rope hoist is designed and manufactured.

With a hoisting capacity ranging from 800kg to 250,000kg,the lift can take the load up to a maximum height of 103.6m.Plenty of models, Configurations and specifications exist for the hoist, from which customers are sure to find the perfect match.

Advantages

Short headroom allows large vertical operating space for the wire rope hoist. Size-C hoist design leaves more vertical space for lifting. Such attribute can be hardly found in any of its contemporaries. The hoisting Hook can reach much closer to the side walls. Minimum side clearance effectively enlarges the work area.

Dynadrive is designed for stable running and fast positioning. It can minimize the load sway and improve operating safety and comfort. Each component of our electric wire rope hoist is rigorously inspected and tested by our qualified engineers to ensure the safety and working efficiency the final product.

A high load factor 60% can be achieved of the motor, whose cooling performance is 30% higher than other similar products. High performance safety Brake has a use life exceeding 1 million cycles. The brake can adjust itself according to the degree of wear. This design requires limited maintenance.

Large-diameter Cable Reel is designed for extended use life and small fleet angle. During lifting, the rope only deviates a little to the side of the drum, which ensures vertical lifting, accurate positioning, and maximum operating convenience.

Given customer needs for performance and ease of operation. ergonomic features are added to the electrical wire rope hoist to increase operating safety and comfort. Double-layer protective polypropylene coating of the pendant control station enables an IP65 rating.

Plenty of options exist, in order to accommodate various customer needs.

Non standard rail width

Special rail gauge

Radio Remote Control

Traveling limit switch

Derailment catches on double girder trolley

Phase protection relays

Hoist travel monitoring device

Sound and light alarm

Explosion proof and/or spark proof hoist

Load indication device

Motors thermal protection

Stainless steel hoist electrical cubicle:IP55 or IP65

Class H motors

Secondary brake

Variable speed lifting

CSA electric control

For any other special requirements, please contact us.

EWH Electric Wire Rope Hoist

Electric Wire Rope Hoist,Electric Hoist For Crane,Proof Wire Rope Electric Hoist,Wire Rope Electric Hoist

Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.com