Start and drive

Engine start:

1. If you start the engine for the first time, please perform maintenance inspection.

2. Check that the transmission shift lever is in the neutral position.

3. The accelerator pedal stepped to the middle position, the clutch pedal stepped to the end, and the key was turned to the “START” position to start the engine.

4. After the engine is started, slowly loosen the accelerator pedal and move it to the idling position.


The starting time of the starter is not allowed to exceed 30 seconds per start, and there is a minimum of 2 minutes between each start.

The engine is not allowed to idle for more than 5 minutes.

For safety, be sure to depress the clutch pedal when starting the engine.

Ramp running:

1. When driving downhill, the engine brake should be used effectively to keep the speed of the car in a safe range.

2. When connecting low gear or downhill, care must be taken not to allow the engine to exceed the allowable speed.

3, before the next steep slope or long slope, should try to brake the work is normal.

4. When the high gear is changed to low gear, you must check the speed meter to confirm the speed and use the engine tachometer to check the engine speed.

Clutch operation:

Whether shifting gears from high gear to low gear or shifting gears from low gear to high gear, the shift method of the two-legged clutch must be used. When driving, after completing the clutch operation, be sure not to step on the clutch color plate.

Braking operation:

1. When braking for parking, use foot brake. When the shift lever is in the neutral position, braking is not suitable.

2. Emergency braking methods should not be used except for emergency situations. In particular, the use of emergency braking in the case of slippery roads in rainy weather is highly likely to cause dangerous situations such as side slip.

3. After the car is washed or through a deep water hole, water may enter the brake drum to reduce the braking performance. When driving, step on a few feet to brake and evaporate water to ensure that the brake can work normally.

To stop the vehicle smoothly, operate the brake pedal as follows:

1. Before the scheduled parking place is 25-35m, the brake pedal will be stepped down by 1/2-1/3.

2. When the scheduled parking place is 5-6m in front, gradually relax the pedal.

3, before going to the parking place, gently step on the brake pedal to stop the car completely.


If the brake pedal is kept on hold, the car will stop impetuously within a short distance;

Avoid brake pedals because they may expel the air in the air reservoir and cause the vehicle to lose control.

Before you reach the parking spot, gently step on the brake pedal to stop the car completely.


1. Try to park in a flat place when parking.

2. Pull up the parking brake lever and place the transmission lever in the neutral position. If necessary, plug the wheel with triangle pad.

3, After driving, temporarily idle the engine, so that the temperature can be reduced after the flameout, especially after a large engine load or high-speed driving, the engine generally high temperature, should not suddenly turn off.

4, turn off all switches after the flameout.

5. After turning the key switch to the "OFF" position, remove the key.

To meet the needs of supplying cooled or heated air to living or working tents or camps used for various events, Tentcool gives the best solutions by Event Tent Air Conditioner products. 

The event tent air conditioner can be used for wedding tents, Birthday Party Tents, Disaster Relief Tents, Worker Camps, etc. No need to consider the weather condition again. Unique design enables cooling or heating in minutes after the air conditioning units are set in place. 


Event Tent Air Conditioner

  • Mobile Compact Design
  • Powerful Cooling or Heating
  • Wide applications
  • Low Noise
  • High Temperature Durable
  • Easy Installation


  • ISO9001
  • ISO14001
  • CE Certified. 

Spare parts warranty of 24 months

After sales services and maintenance on demand.

Technical Data:

Type Horizontal Vertical Horizontal Vertical Horizontal Vertical Horizontal Horizontal
Cooling capacity kW 7.00 7.00 12.00 12.00 18.00 18.00 40.00 70.00
Heating capacity  kW 7.70 7.70 13.50 13.50 19.50 19.50 45.00 77.00
Electric Heating kW 3.00 3.00 4.00 4.00 6.00 6.00 8.00 15.00
Rated cooling power input W 2550 2550 4150 4150 7000 7000 17500 30200
Rated heating power input W 2650 2650 4450 4450 8500 8500 18500 31400
Rated cooling current input A 12.2A 12.2A 7A 7A 11.7A 11.7A 29.5A 51.1A
Rated heating current input A 12.7A 12.7A 7.5A 7.5A 13.2A 13.2A 31.2A 53.0A
Evaporating side airflow m3h 1000 1000 2000 2000 3000 3000 5500 5500
Condensing side airflow m3h 3500 3500 5000 5000 10000 10000 22000 22000
Air pressure Pa 200 200 200 200 200 200 200 200
Evaporating side Noise dB(A) ≤40   ≤40   ≤45   ≤45   ≤48   ≤48   ≤52   ≤52  
Condensing side Noise dB(A) ≤55   ≤55   ≤60   ≤60   ≤65   ≤65   ≤70   ≤72
Net Weight kg 110 125 180 200 250 260 380 780
Dimension  (L x W x H))  mm 1150×710×820 740*620*1120  1280×930×1000 835*735*1275 1400×1080×980 930*850*1380 2100*1100*1210 2800*2100*1210

Event Tent Air Conditioner

Event Tent Air Conditioner, Wedding Tent Air Conditioner, Relief Tent Air Conditioner, Emergency Mobile Air Conditioning, Disaster Saving Portable Air Conditioner, Disaster Relief Tent air conditioner

Taizhou Tentcool Electrical Appliance Co., Ltd. ,