List of new amino acid dedicated dryers

According to the characteristics of amino acids, Jiangsu Changzhou Shuangfei Granulation Drying Equipment Co., Ltd. has successfully developed a new type of special amino acid dryer, which has been introduced to the market and has been used by amino acid manufacturers.

Amino acids are the main nutrients for the survival and health of humans and animals. There are many kinds of amino acids and their drying prospects are very broad. However, amino acid drying is difficult, some companies use traditional equipment to dry, the temperature is too low, the drying speed is slow; when the temperature is too high, amino acids will zoom. First, high-temperature drying, the surface of the amino acid granules will quickly form a hard shell so that the water inside the particles will not evaporate, so that it is difficult to make the whole particles get dried; and using the first low temperature after high temperature drying, can avoid the surface crusts of amino acid particles, so that particles Get evenly dry inside and outside quickly. The specific engineering process is as follows: air is purified and heated and then introduced by the induced draft fan from the lower part. Through two holes of the sifting bed, the residual heat from the next layer is dried for the first time at low temperature. After a period of time, artificial Next to the next layer and the fresh hot air for a second high temperature drying, drying is completed, the material is discharged to the bottom of the dryer.

The dryer is in a vertical shape, with an upper part feeding and a lower part discharging; a vibration motor is provided to allow the material to turn over and the material is heated and dried uniformly; the hot air is used twice to save energy; the closed negative pressure operation is performed and the air is filtered , It has a manual cleaning port, which can be easily cleaned to meet GMP requirements.

Conveyor pulleys are the main elements providing the transmission of torque from the drive and ensuring that belts remain taught. As per international standard design and manufacturing technology, there are Head Pulley , tail pulley and Bend Pulley . Conveyor pulleys are often lagged with rubber to improve the friction between the drive pulley and the belt. Conveyor Pulleys are used to transmit the drive power into the conveyor belt and as such, are subjected to the dynamic belt tension forces in a conveyor.

 Conveyor Pulley

There are a number of different types of pulleys available for use on conveyors as well as different design parameters for pulleys serving different functions on the same conveyor.

 

Drive Pulley: Transmit the power with the contact force between the belt and the surface of the pulley 

Snub Pulley: The purpose of the Snub Pulley is to wrap the belt further around the drive pulley to improve the transmission of the driving force, and to eliminate belt slip.

Bend Pulley: Changes the direction of a belt

Take-Up Pulley:  Generally attaches to a weigh and maintains proper

Tail Pulley: Turns freely, which is located at the tail end of the belt conveyor

 

Special: XKTE supplies both high-quality Conveyor Components and Professional bearings.

 

XKTE Roller Bearing- running - in material handling bulk conveyor system.

 

Types and arrangement of pulley bearings

The bearings are self-aligning relative to their raceways, which means that the bearings can be 'misaligned' relative to the shaft and plummer blocks, to a certain degree. In practical terms this implies that the bending of the shaft under loaded conditions as well as minor misalignment of the pulley support structure, can be accommodated by the bearing.

 

1. Bearings used for conveyor pulleys are generally spherical roller bearings, chosen for their radial and axial load supporting characteristics.

2. Self-aligning Ball Bearing

Conveyor Pulley

Conveyor Pulley

Conveyor Pulley,Conveyor Drum Pulley,Belt Conveyor Pulley

Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl