Dongfeng XBW Sewage Suppressor Freda 3T Sewage Sewage Sewage Squeegee Picture

Dongfeng XBW Sewage Cart Product Model: EQ1060TJ20D3 Product Specifications: 3-4m3 Chassis: Dongfeng Emission Standard: State III Engine: Yuchai and Chaochai Matching Vacuum Sewage Cart Introduction:

Vacuum suction vehicles, also known as sewer trucks, sewer trucks, sewer trucks, and sludge cleaning trucks, use vacuum negative pressure principles to suck fecal matter and liquid filth into vehicle-mounted storage containers to achieve container collection of feces, reducing secondary usage. Pollution, and equipped with vehicle-mounted cleaning devices, are the preferred equipment for improving the level of sanitation management in urban and rural areas and improving the working conditions of sanitation workers. Sewage suction truck is a new type of sanitation vehicle that collects and relays cleanup of transportation sludge and sewage to avoid secondary pollution. Sewage suction truck can be self-priming and self-discharging. It has fast working speed, large capacity, and convenient transportation. It is suitable for collecting transportation manure and mud. Crude oil and other liquid substances are particularly suitable for the suction, shipment, and discharge of sludge in sewers, and particularly for objects with large suspended solids such as sewage sludge, stones, bricks, and the like. Hubei Aoli Dongfeng Furuka Sewage Sewage Cart adopts the domestic leading technology vacuum pump (Japanese technology), which has the advantages of large suction force, long suction range, and low heat generation.

Vacuum Sewage Vehicle Features:

Dongfeng XBW Sewage Sewage Truck is mainly used to clean city sewers, pipeline sediments, and dredge mudslides. This model is usually used in conjunction with high pressure cleaning trucks. You can also view our high pressure cleaning car products or directly purchase high pressure cleaning. Sewage suction joint dredge car products.

My company's Dongfeng Xiaobawang small suction truck has features such as high suction efficiency, self-priming, self-discharging, and direct irrigation. Filling the manure tank time: ≤ 5min, suction process: ≥ 8m. Sewage suction vehicles have the advantages of long service life, high working speed, easy operation and convenient transportation.

The head of the can body is die-cast, the can body can be opened, and the double top can be dumped. The dirt in the tank can be dumped directly through the rear cover, with a high degree of vacuum (more suction than a suction truck), large tonnage, high efficiency, and a wider range of uses.

The sewage suction pump equipped with the 3t bulldozer can be self-priming and self-discharging. The suction tank can be hydraulically unloaded and the back cover can be opened hydraulically. The suction pump has a high vacuum degree and a long suction range.

The main technical parameters】

product name

Dongfeng bully sewage suction car

Tank volume

3-4 cubic

Total mass

6495

Maintenance quality

3700

Rated contained mass

2600,2665

Overall dimensions mm

5990×1950×2550

The number of passengers in the cab

3,2

Approach / departure angle

19/15

Front suspension/rear suspension

1032/1658

Number of axes

2

Wheelbase

3300

Axle load

2600/3895

Maximum speed

95

other

Transport name: Liquid dirt, density: 900 kg/m3. The effective volume of the tank: 3-4 cubic meters, the tank body dimensions (straight length × maximum diameter) (mm): 3000 × 1220. With the optional chassis cab. Side protection is symmetrical with cold-formed channel steel / Q235-A, threaded connection. After the protection of cold bend channel steel / Q235-A, welded connection. The height of the rear protective section is 250mm, the width of the section is 50mm, and the height of the lower edge is 520mm.

[chassis technical parameters]

Chassis model

EQ1060TJ20D3

Chassis name

Car chassis

Trade name

Dongfeng Brand

manufacturer

Dongfeng Motor Co., Ltd.

Dimensions

5820×1940×2080

Number of tires

6

Approach / departure angle

19/15

Tire specifications

7.00-16, 6.50-16, 7.00R16, 6.50R16

Number of leaf springs

8/9+5,6/8+4

Front track

1506

Fuel type

Diesel

Rear track

1466

Emission Standards

GB3847-2005, GB17691-2005 State III

engine model

Engine manufacturer

Displacement ml

Power kw

YC4F90-30

CY4102-C3F

YN27CR

YN30CR

SD4BW70-3R

4D22E

YCND27-90-30

YCND27-100-30

CY4100-E3F

4JB1TI

Guangxi Yuchai Machinery Co., Ltd.

Dongfeng Chaoyang Diesel Engine Co., Ltd.

Chengdu Yunnei Power Co., Ltd.

Chengdu Yunnei Power Co., Ltd.

Jiangsu Sida Power Machinery Group Co., Ltd.

Anhui Quanchai Power Co., Ltd.

Guangxi Yuchai Machinery Co., Ltd.

Guangxi Yuchai Machinery Co., Ltd.

Dongfeng Chaoyang Diesel Engine Co., Ltd.

Chengdu Chengfa Automobile Engine Co., Ltd.

2659

3856

2672

2977

2545

2156

2659

2659

3707

2771

66

70

66

76

70

65

66

75

73

75

The composition and working principle of vacuum sewage truck

Sewage truck components: oil-water separators, water and gas separators, power take-offs, drive shafts, dedicated vacuum pumps, vacuum gauges, pipe network systems, suction tubes, gravity valves, vacuum Tanks , connected vessels Dung window), hand-washing device, automatic anti-overflow valve, hydraulic kit.

Sewage suction truck working principle: Because the suction hose is always immersed on the liquid surface, the air in the fecal tank is sucked and becomes thinner because it cannot be supplemented, resulting in the pressure in the tank being lower than the atmospheric pressure. That is, under atmospheric pressure, the suction hose enters the tank. Or because the siphon tube is close to the bottom of the tank, when the air is continuously discharged into the manure tank, it is compressed because it has no way out. As a result, the pressure in the tank is higher than the atmospheric pressure. The manure fluid is discharged through the siphon tube and the suction hose under the action of the compressed air. Outside the tank.

Sewage suction car classification

According to the brand classification: Dongfeng Sewage Suction Vehicle, Liberation Suction Vehicle, Futian Sewage Sewage Vehicle, Heavy Duty Sewage Sewage Vehicle, Shaanxi Steam Sewage Suction Vehicle, and JAC Sewage Sewage Vehicle.

According to the appearance classification: single bridge sewage suction truck, double bridge suction sewage truck, flat suction truck, tip suction truck, small suction truck, medium suction truck, large suction truck.

Classified by volume (tonnage): 3 tons of sewage suction trucks, 4 tons of sewage suction trucks, 5 tons of sewage suction trucks, 6 tons of sewage suction trucks, 8 tons of sewage suction trucks, rear 12-ton sewage suction trucks, and double bridges Tons of sewage suction trucks.

Our company's conventional products: Dongfeng Xiaobawang Sewage Cart, Dongfeng Duolika Sewage Cart, Dongfeng 140 Tip Sewage Cart, Dongfeng 145 Sewage Cart, Dongfeng 153 Sewage Cart, Jiangling Sewage Cart, JAC Sewage Cart, Futian Sewage-sucking vehicles, heavy-duty trucks, sewage trucks, sedative vehicles, Dongfeng Tianjin suction sewage trucks, Dongfeng Tianlong rear bridge sewage suction trucks, and high-pressure cleaning sewage trucks.

Shell and Tube Heat Exchanger Heat Exchanger is part of the heat transfer fluid will heat to the cold fluid equipment, also known as the heat exchanger shell and tube heat exchangers is the General Equipment in chemical, petroleum, power, food and many other industrial sectors, occupies an important position in the production of heat exchanger type is many. But, according to the principle and method of cold and thermal fluid heat exchange basically can be divided into three categories: recuperative, hybrid and regenerative. In three kinds of heat exchanger, heat exchanger is mostly used.
Recuperative heat exchanger according to different heat transfer tubes: FPR floating coil heat exchanger, LWR threaded pipe heat exchanger, WMH membrane heat exchanger. Eddy heat (heat exchange equipment promotion center)
Advantages of Shell And Tube Heat Exchanger:
1, high heat transfer coefficient: thread tube is of high efficient heat transfer component combination of internal and external thread is made of high thermal conductivity of copper or stainless steel, thread made Tube Heat Exchanger, the fluid resistance is small, then the formation of strong turbulence, which greatly improves the heat pipe inside and outside coefficient. Through the test, steam water heat when the total heat transfer coefficient is up to 3000~6000W/m2 DEG C, water water heat when the total heat transfer coefficient of 2500~5500W/m2 degrees.
2. Compact structure: This product has a large heat transfer area per unit volume, and the total heat transfer coefficient is high, so the area is greatly reduced, saving material and space
3, is not easy to scale because of the special structure of the concavo convex thread tube, the tube inside and outside effects of multi layer and rotary flow erosion, coupled with the thermal shrinkage of the extension tube, inside and outside of the tube wall will not remain impurities, so it is not easy to fouling, long running effect is good.
4, it is not easy to leak: This product is short sealing circumference, the coarse thread of the threaded pipe is similar to the expansion joint, which has the ability of compensation, the heat stress of the heat exchanger is small, and it is not easy to leak
5, easy to install: this series of heat exchangers have horizontal and vertical two types of easy to install in different locations

Shell And Tube Heat Exchanger

Shell Heat Exchanger,Tube Heat Exchanger,Stainless Steel Heat Exchanger

Wuxi Weishitiong Machinery Co., Ltd. , http://www.madeinwst.com